2N Access Unit - 2 N Access Unit Configuration Manual; ;

2N Access Unit Configuration Manual
107 / 134
•
•
•
•
•
•
MD5 Authentication Enabled– enable authentication of network devices via the 802.1x
EAP-MD5 protocol. Do not enable this function if your LAN does not support 802.1x. If you
do so, the2NAccess Unitwill become inaccessible.
Password– enter the access password for EAP-MD5 authentication.
TLS Authentication Enabled– enable authentication of network devices via the 802.1x
EAP-TLS protocol. Do not enable this function if your LAN does not support 802.1x. If you
do so, the2NAccess Unitwill become inaccessible.
Trusted Certificate– specify the set of trusted certificates for verification of the RADIUS
server public certificate validity. Choose one of three sets of certificates; refer to the
Certificates subsection. If no trusted certificate is included, the RADIUS public certificate is
not verified.
User Certificate– specify the user certificate and private key for verification of
the2NAccess Unitauthorisation to communicate via the 802.1x-secured network
element port in the LAN. Choose one of three sets of user certificates and private keys;
refer to the Certificates subsection.
OpenVPN
Use OpenVPN to connect the device to another network.
Enabled– enables the virtual private network (VPN).