2N Access Unit - 2 N Access Unit Configuration Manual; ;

2N Access Unit Configuration Manual
119 / 134
1.
2.
•
•
•
•
•
•
MODEL in the filename specifies the intercom model:
au–2NAccess Unit
aug2 –2NAccess Unit2.0
MACADDRis the MAC address of the2NAccess Unitin the 00-00-00-00-00-00 format. Find the
MAC address on the2NAccess Unitproduction plate or on theStatustab in the web interface.
Example:
2NAccess Unitwith MAC address 00-87-12-AA-00-11 downloads the following files from the
TFTP server:
au-firmware.bin
au-common.xml
au-00-87-12-aa-00-11.xml
List of Parameters

Firmware/Configuration Update Enabled– enable automatic firmware/configuration
updating from the TFTP/HTTP server.
Address Retrieval Mode– select whether the TFTP/HTTP server address shall be entered
manually or a value retrieved automatically from the DHCP server using Option 66 shall be
used.
Server Address– enter the TFTP (tftp://ip_address), HTTP (http://ip_address) or HTTPS
(https://ip_address)server addressmanually.