2N Access Unit - 2 N Access Unit Configuration Manual; ;

2N Access Unit Configuration Manual
23 / 134
•
•
•
•
•
•
•
•
Pairing via Bluetooth Module in Intercom
To pair a mobile phone with the user:
Click at Auth ID to start pairing for the selected user account.
A dialogue window with the PIN code is displayed.
Find the appropriate reader in the2N
®
Mobile Keyapplication and press Start pairing.
Enter the code from item 2 into the input field.
Pairing is completed.

User Fingerprints–display the set count of fingerprints; up to 2 different fingerprints can
be set.This section is displayed only if the biometric reader module is available.
enrolvia USB reader
enrol via Fingerprint scanner module 3
Refer to Subs.5.2.1.1 User Fingerprint Setting Instructionsfor user fingerprint loading details.

2N Access Unithelps you use the recognized license plates sent in the HTTP request by the AXIS
cameras equipped with additional VaxALPR to api/lpr/licenseplate (refer to theHTTP API
manual for IP intercoms).
The function can be disabled or enabled whenever the license plate is recognized for a user who
has currently valid access rights (parameters:Entry rules,Exit rules,Validity termin Subs.5.3.2
Door).
Door (gate etc.) opening after a valid license plate is detectedworks independentlyof the other
Authentication ways set in the Access profiles.
In case the function is on, the event is recorded into the LicensePlateRecognized history when a
valid HTTP request has been received.
•
Caution
The fingerprint loading capacity is up to 2000 per device.
