2N Access Unit - 2 N Access Unit Configuration Manual; ;

2N Access Unit Configuration Manual
73 / 134
•
•
•
Fingerprint Reader Module Configuration
Module Name–set the module name for logging events from the Fingerprint reader.
Door –set the reader direction (Arrival, Departure) for the Attendance system purposes.
Associated Switch–set the switch to be activated after user authentication via this
module. If you set Door Lock Switch, the authentication rules specified in Hardware / Door
will be used.

• The display is not supported on Access Unit 1.0 from FW version 2.27.
•
Caution
Whenever the fingerprint reader is disconnected, the User fingerprints will be
hidden in the user profile after restart. This section displays how many user
fingerprints have been uploaded to the intercom memory. Once a fingerprint
reader is reconnected, the User fingerprints will be displayed again.
