2N Access Unit - Extenders

2N Access Unit Configuration Manual
61 / 134
•
•
•
•
•
•
•
•
•
•
•
•
•
•
5.3.8 Extenders
You can enhance the2NAccess Unitwith extending modules connected to the basic unit. The
following modules are available:
Five-button module
Keypad module
Infopanel module
Card reader module
Bluetooth module
I/O module
Wiegand module
OSDP module
Inductive loop module
Display module
Fingerprint reader
Touch keypad
Touch keypad&RFID reader 125 kHz, 13.56 MHz
Bluetooth & RFID reader 125 kHz, 13.56 MHz
The modules are chain-like interconnected. Each of the modules has its number depending on
the chain position (the first module has number 0).
You can configure each module separately. The parameters are specific for the given module
type.
•
Caution
The connected module is not detected automatically. Restart the device to see the
module in the extender list.
