2N Access Unit - 2 N Access Unit Configuration Manual; ;

2N Access Unit Configuration Manual
129 / 134
•
•
•
Upgrade Firmware– upgrade your2N Access Unit firmware. Press the button to display a
dialogue window for you to select and upload the firmware file to the intercom. The2N
Access Unit will automatically get restarted and new FW will then be available. The whole
upgrading process takes less than one minute. Refer towww.2n.cz. for the latest FW
version for your intercom. FW upgrade does not affect configuration as the2N Access Unit
checks the FW file to prevent upload of a wrong or corruptedfile.
Check Firmware Online– check online whether a new firmware version is available. If so,
download thenew FW version and an automatic device upgrade will follow.
Restart Device– restart the 2N Access Unit. The process takes about 30 s. When the2N
Access Unit has obtained the IP address upon restart, the login window will get displayed
automatically.
•
Caution
The default state reset deletes the license key if any. Hence, we recommend you to
copy it to another storage for later use.
