2N Access Unit - 2 N Access Unit Configuration Manual; ;

2N Access Unit Configuration Manual
109 / 134
Trace
In theTracetab, you can launch capturing of incoming and outgoing packets on the intercom
network interface.The captured packets can be stored locally in the IP intercom4 MBbuffer or
remotely in the user PC.
When the local capture buffer is full, the oldest packets are rewritten automatically. We
recommend that you lower the video stream transmission rate below 512 kbps while capturing
packets locally.Press to start, to stop and to download the packet capture file.
Press to start remote capturing. Specify the capturing time interval (s)for the incoming and
outgoing packets. When the set time value passes, the packet capture file will be downloaded
automatically to the user PC.Press to stop capturing.