2N Access Unit - 2 N Access Unit Configuration Manual; ;

2N Access Unit Configuration Manual
21 / 134
•
•
•
•
•
•
•
•
•
Entry Rules
Access Enabled– enable authentication via this access point.
Access Profiles–select one of the profiles pre-definedin Directory / Time profiles or
set the time profile for this element manually.
Exit Rules
Access Enabled– enable authentication via this access point.
Access Profiles–select one of the profiles pre-definedin Directory / Time profiles or
set the time profile for this element manually.
Validity term
Valid from–set the beginning of the mode validity term.
Validto–set the end of the mode validity term.
Each user can be assigned a private switch activation code. The user switch codes can be
arbitrarily combined with the universal switch codes defined in theHardware | Switchesmenu.
If the codes are identical with the codes already defined in the intercom configuration, the
mark will appear at the colliding codes.
PIN Code–set theuser's Personal Identification Number.The code must include 2 characters at
least.