2N Access Unit - 2 N Access Unit Configuration Manual; 5.4.1 E-mail; ;

2N Access Unit Configuration Manual
84 / 134
•
5.4.1 E-mail
To inform the intercom users on all missed and/or successfully completed calls,
configure2NIPintercom to send an e-mail after every call to the called user. You can compile
the e-mail subject and message text of your own. If your intercom is equipped with a camera,
you can automatically attach one or more snapshots taken during the call or ringing.
The intercom sends e-mails to all the users whose valid e-mail addresses are included in the
users list. If theE-mailparameter in the user list is empty, e-mails are sent to the default e-
mailaddress.
You can also send e-mails via Automation using theAction.SendEmailaction.
SMTP
SMTP service enabled– enable/disable sending e-mails from the intercom.
•
Note
The E-mail function is available with the Gold or Enhanced Integration licence only.
