2N Access Unit - 2 N Access Unit Configuration Manual; 1. Product Overview; ;

2N Access Unit Configuration Manual
3 / 134
1. Product Overview
Door access system2NAccess Unitcan (with addon software and/or with2NIPintercoms)
offers you a whole setup for access controle over any whole object.
Your2NAccess Unitcan beequipped with a numeric keypad, so you can use it as code lock.
Your2NAccess Unitcan also beequipped with another RFID card reader, so it can be used as a
part of your security system orattendance system in your company.
2NAccess Unitcan beequipped with a relay to control eletric lock or any other device
connected to this access system. There are a lot ofpossibilities to set up, when and how to
activate these switches - with code, automaticaly, by pressing a buttonetc.
The following symbols and pictograms are used in the manual:
•
Safety
Always abide by this information to prevent persons from injury.

•
Warning
Always abide by this information to prevent damage to the device.

•
Caution
Important informationfor system functionality.

•
Tip
Useful informationfor quick and efficient functionality.

•
Note
Routines or advice for efficient use of the device.
