Mounting Types Overview
Refer to the table below for a list of mounting types and necessary components. You
can assemble multiple units in all the mounting types.
Flush mounting - classic bricks
incl. hollow bricks, thermally insulated walls, etc.
What you need for mounting:
a properly cut hole as instructed in the box package
plaster, mounting glue, mounting foam or mortar as
necessary
2N
®
Access Unit , flush mounting boxes and frames
1 module: box Part No. , frame part No.9155014
9155011
2 modules: box Part No. , frame part No.9155015
9155012
3 modules: box Part No. , frame part No.9155016
9155013
To Next Page
Loading...
