9134173Part No.
Mifare RFID card,
13.56 MHz
obj. č. 9134174
Mifare RFID key
fob, 13.56 MHz
Part No. 9159014EU/US/UK
2N 2Wire
®
(set of 2 adapters plus EU/US/UK power
supply)
Converter 2N 2Wire
®
Helps you
connect any IP device to your existing
two-wire cabling from the original door
bell/phone without reconfiguring. All
you have to do is have one 2N 2Wire
®
at each end of the cable and connect
one of them at least to the power
supply. 2N 2Wire
®
then provides PoE s
upply not only to the other converter,
but also to all the IP terminal equipment
connected.
Part No. 9159013
Departure button
Connects the logic
input for door
unlocking from inside
the building.
Part No. 9159012
Magnetic door
contact
A door installation
set for door
opening status
identification. Used
for door protection,
open door
detection or violent
door opening.
Part No. 9159030
External RFID card reader, 125 kHz
A secondary card reader to an internal
card reader. Provides card access
control from both sides of the door.
IP67 covering. Useful for outdoor
applications too. Supports the EM4100
and EM4102 cards.
To Next Page
Loading...
