2N TELEKOMUNIKACE a. s., Modřanská 621, 143 01 Praha 4, Czech Republic, tel.: +420 261 301 111, fax: +420 261 301 999,
e-mail: obchod@2n.cz IČO: 26183960, DIČ: CZ 26183960, Společnost je zapsaná v obchodním rejstříku vedeném Městským soudem
v Praze, oddíl B, vložka 6613. Č.Ú.: 51-1400870237/0100, 714154001/2400, 188430466/0300 www.2n.cz
3. Remove screw stick and replace it by smaller one which you will find attached in box,
see (Pic. 2). After replacing of smaller screw stick (Pic. 3) place RFID card
reader/Additional relay to the connector (Pic. 5).
Pic. 5
4. In the (Pic. 6) you can see already placed RFID card reader (Additional relay can be
also used!!!).
Pic. 6
To Next Page
Loading...
