Need help?Do you have a question about the 2N IP Style and is the answer not in the manual?
General| Tamper Switch | Yes |
|---|---|
| Power Supply | 12V DC |
| Ingress Protection | IP65 |
| Inputs | 2 |
| Operating Voltage | 12V DC |
| Speaker Impedance | 8 Ohm |
Details main units, mounting accessories, and extending modules for the 2N IP Style intercom.
Explains the meaning of various symbols (Safety, Warning, Caution, Tip, Note) used in the manual.
Outlines the product completeness check before starting the installation process.
Details the surface and flush mounting options for the 2N IP Style intercom.
Covers power supply options, including external DC and PoE+ for the 2N IP Style intercom.
Explains how to connect various extending modules to the 2N IP Style via the VBUS connector.
Describes how to configure the 2N IP Style intercom via web interface or software.
Details user interaction with the 2N IP Style, including sleep mode and home page operations.
Explains how internal users can answer calls, unlock doors, and control the intercom.
Provides guidelines for cleaning and maintaining the 2N IP Style device.
Lists available software downloads like USB driver, IP Eye, and Network Scanner.
Directs users to FAQ for frequently asked questions and troubleshooting.
Lists relevant EU directives, Industry Canada compliance, and FCC regulations for the device.
Provides general safety instructions, cautions regarding product use, and liability disclaimers.
To Next Page
