Need help?Do you have a question about the 2N IP Vario and is the answer not in the manual?
General| Type | IP Intercom |
|---|---|
| Connectivity | Ethernet |
| IP Rating | IP54 |
| Tamper Switch | Yes |
| Housing Material | Aluminum |
| Buttons | Yes |
| Display | Optional LCD display |
| Power Supply | PoE (IEEE 802.3af) |
| Protocols | SIP, RTSP, HTTP, HTTPS |
| Operating Voltage | 12V DC |
| Audio | Full-duplex |
Details the various basic units and their features, including part numbers.
Explains the meaning of symbols and pictograms used throughout the manual for safety and guidance.
Covers different installation types (surface, flush) and required components for the intercom.
Details all electrical connections, including PCB connectors, Ethernet, power, and locks.
Provides instructions for sealing holes, fitting covers, and final checks for proper installation.
Explains how to connect various extending modules like button modules, card readers, and relays.
Guides users on configuring the device, including IP address settings and network parameters.
Explains how external users can dial, answer calls, open doors, and activate profiles.
Details display functions, advertisement mode, electronic name tags, and phone book operations for external users.
Describes how internal users can answer calls, control locks, and manage profiles via their telephone.
Provides guidelines for cleaning the device and replacing future tags or making programming changes.
Lists available software drivers, utilities, and templates for download, aiding in device management.
Directs users to the FAQ section for common questions and solutions to potential issues.
Outlines the European directives, Industry Canada compliance, and FCC rules applicable to the product.
Covers crucial safety instructions, general cautions, and handling procedures for the product and its components.
To Next Page
