2.5 Extending Module Connection
2N IP Vario
®
allows to connect following extending modules:
Extending button modules
Additional Switch
Internal RFID Card Reader 125 kHz
Security Relay
Wiegand Isolator
Induction Loop
Extending button modules
2N IP Vario
®
features an easy installation of extending button modules. Extending
modules are connected using a single cable (included in every extender delivery) in a
chain pattern (every additional unit is connected with the previous one). Each
extending module has two connectors – an input connector (for connection towards
the basic unit) and an output connector (for connection of another, more 2N IP Vario
®
remote unit). Be sure to maintain the correct orientation of the units and avoid
connector mismatch to ensure a proper function of the device!
Connection of One-Row-Button Extending Modules
To Next Page
Loading...
