Need help?Do you have a question about the 2N IP Uni and is the answer not in the manual?
General| Type | IP Intercom |
|---|---|
| Ethernet | 10/100 Mbps |
| Tamper Switch | Yes |
| Audio Codec | G.711, G.722 |
| Video Codec | H.264, MJPEG |
| Protocols | SIP, RTSP, ONVIF |
| Ingress Protection | IP54 |
| Network Interface | RJ45 |
| Humidity | 10% to 90% non-condensing |
Details various types of electric locks compatible with the intercom.
Explains power supply options for the intercom system.
Guides on checking product completeness before installation.
Covers general principles and types of mechanical installation.
Details the process of flush mounting in classic brick walls.
Describes the final steps for completing the intercom installation.
Details the process of flush mounting in plasterboard walls.
Describes wall mounting for concrete and steel structures using a specific box.
Provides step-by-step instructions for wall mounting.
Covers connecting the intercom to LAN, power, and electric locks.
Explains how to connect the intercom to the Local Area Network (LAN).
Details connecting an external power supply.
Explains Power over Ethernet (PoE) supply options.
Describes connecting the electric lock to the intercom.
Describes how to reset the device to factory default settings.
Provides recommendations for installing overvoltage protection.
Provides recommendations for installing overvoltage protection.
Explains how to connect extending modules to the intercom.
Details the 2N Security Relay and its function for enhancing security.
Details the configuration steps for the 2N Security Relay.
Explains how to configure the 2N IP Uni using a web browser.
Details steps to retrieve the intercom's IP address.
Explains how to switch between static and dynamic IP address modes.
Presents visual diagrams of the intercom's physical layout.
Directs users to FAQs for troubleshooting assistance.
To Next Page
