2.3 Electric Installation
Description of Printed Circuit Board Connectors
Terminal Block X2 Connection
Ethernet Connection
Electric Lock Connection
External Power Supply Connection
Configuration Connector Connection
Display Connector
Card Reader Connection
Grounding
Available switches
2N IP Vario
®
is designed for connection in the Ethernet computer network (10
/100BASE-T) using a UTP cable. Use a CAT 5e UTP cable at least for connection.
The device must be part of the electrical system of the building.
2N IP Vario
®
is fed through the PoE (Power over Ethernet) technology. No additional
cabling is therefore necessary. If your Ethernet is not equipped with the PoE
technology, it is possible to use a PoE injector, Part No. 91378100. As an alternative,
you can use a power adapter, Part No. 91341481E. is configured over an 2N IP Vario
®
integrated administration web server, which can be controlled from any web browser,
e.g., Mozilla Firefox.
Tip
Video Tutorial: Door communication system 2N® IP Vario – Electrical
.Installation
To Next Page
Loading...
