2N IP Style - IP Style LAN Location Via 2 N Network Scanner

2N TELEKOMUNIKACE a.s., www.2n.cz 82/105
1.
2.
Factory Default Reset
Located among the main unit connectors, the CONTROL button helps you reset the
factory default values.
Follow the instructions below to reset the factory default values:
Disconnect the device from the power supply.
Press and hold the CONTROL button.
Connect the device to the power supply.
Keep holding the button for a few seconds and then release it.
3.1.1 2N® IP Style LAN Location via 2N® Network Scanner
2N IP Style
®
is configured via the administration web server. Connect the device to
the LAN IP and make sure it is properly powered.
2N ® Network Scanner Description
The application helps find the IP addresses of the 2N devices in the LAN. Download
the app from the 2N web sites ( ). Make sure that Microsoft .NET Framework www.2n.cz
2.0 is installed for successful app installation.
Run the installer.2N
®
Network Scanner
Use the Setup Wizard for successful installation.