SelectLanguage ▼
360fly-4k User Guide (IOS Ų)
Getting Started
Congratulations on landing your new 360fly 4K camera.
This powerful camera and its apps make you part of an emerging community of visual storytellers and explorers, one that is
fundamentally changing the way we experience and capture the world. Join them now and begin sharing your best 360° 4K videos,
ideas, and inspiration at www.360fly.com (https://www.360fly.com/).
Charging the Battery:
To charge your camera, insert the USB cable into a USB outlet adapter rated at 1.5A to 2.1A (most tablet charger adapters) and plug it
into the 360fly 4K Power Cradle.
Next, simply place the camera on the charger base. For best results, charge your camera while it’s powered off.
While your camera is charging, its LED indicator will flash green. When fully charged, the camera LED will remain solid green. It is
recommended you charge your camera for at least 30 minutes prior to its first use.
When your camera battery is low, the LED will display a light purple color. Be sure to charge your camera before using it when the LED
is light purple.
Powering Up:
Remove the camera from its Power Cradle and turn it on by holding the OnePush button down for four seconds. The triangular
OnePush button is surrounded by the LED indicator and located on the side of the camera. When powering up, the camera will vibrate
three times and the LED will flash blue. After completing the power-up sequence, the LED will display a solid blue color, indicating that
your camera is on and ready to fly.
(https://www.360fly.com/)
To Next Page
Need help?
General
