Patient Instructions
CONNECTING YOUR LUNA G3 WITH WI-FI MODULE
1. Before beginning setup, please make sure you know the NAME and PASSWORD of
the network you are attempting to connect to
2. Make sure your device is plugged in and powered on.
3. Hit the home button on the face of the device, bringing up the main menu.
4. Use the selector wheel to scroll clockwise until you illuminate the settings icon on
the right hand side of the main menu.
5. Press the selector wheel to select the settings option.
6. Once in the setting option scroll down to the Wi-Fi settings by turning the selector
wheel counter-clockwise until you see an icon labeled Wi-Fi.
7. Press the selector wheel once the Wi-Fi icon is illuminated.
8. If the device is currently not connected to a network, press the selector wheel
and scroll clockwise until you encounter the name of the network you are trying
to connect to. You will need to know the name of the network you are trying to
connect to in order to connect this device.’
To Next Page
Need help?
General
