What to do if my 3B G3 Respiratory Product produces very low pressures?
If your device produces very low pressures, the air inlet may be blocked. Replace the air filter and clean the air inlet, ensuring it's unblocked. Also, the treatment pressure may have been changed accidentally, so contact your physician. If the Ramp feature is enabled, the pressure will gradually increase; disable it or shorten the ramp time if needed.
Why do my obstructive sleep apnea symptoms recur when using 3B G3?
Recurring obstructive sleep apnea symptoms can be caused by weight change, medication or alcohol use, or poor mask fit. Contact your physician for assistance.
What to do if I feel discomfort due to inability to adapt to the treatment pressure of 3B G3?
Adapting to the treatment pressure can take time. If discomfort persists, contact your physician or home care company for assistance. Note that the treatment pressure is a prescription and lowering it too much can make the therapy ineffective.
What to do if the screen displays intermittently, or displays nothing at all on my 3B G3 Respiratory Product?
If the screen displays intermittently or not at all, the operating system may need to be readjusted. Unplug the power cord, wait 20 seconds, and then plug it back in.
General| Data Storage | SD Card |
|---|---|
| Heated Humidifier | Integrated |
| Therapy Modes | CPAP |
| Altitude Compensation | Yes |
| Connectivity | Bluetooth |
| Power Source | AC |
| Battery Life | Optional external battery available |
Instructions for removing and filling the humidifier's water chamber.
Instructions for opening and cleaning the humidifier's water chamber.
Lists patient-related problems like nasal issues, dry mouth, and eye irritation.
To Next Page
