What to do if my 3B Luna G3 BPAP 25A Respiratory Product produces very low pressures?
If your device produces very low pressures, the air inlet may be blocked. Replace the air filter and clean the air inlet, ensuring it's unblocked. Also, the treatment pressure may have been changed accidentally, so contact your physician. If the Ramp feature is enabled, the pressure will gradually increase; disable it or shorten the ramp time if needed.
Why do my obstructive sleep apnea symptoms recur when using 3B Respiratory Product?
Recurring obstructive sleep apnea symptoms can be caused by weight change, medication or alcohol use, or poor mask fit. Contact your physician for assistance.
What to do if I feel discomfort due to inability to adapt to the treatment pressure of 3B Respiratory Product?
Adapting to the treatment pressure can take time. If discomfort persists, contact your physician or home care company for assistance. Note that the treatment pressure is a prescription and lowering it too much can make the therapy ineffective.
What to do if the screen displays intermittently, or displays nothing at all on my 3B Respiratory Product?
If the screen displays intermittently or not at all, the operating system may need to be readjusted. Unplug the power cord, wait 20 seconds, and then plug it back in.
General| Brand | 3B |
|---|---|
| Model | Luna G3 BPAP 25A |
| Category | Respiratory Product |
| Language | English |
Instructions on how to fill the water chamber.
Steps to detach the water chamber.
Instructions for cleaning the water chamber.
Solutions for common issues experienced by patients.
To Next Page
