44 CHAPTER 3: SETTING UP FOR MANAGEMENT
CAUTION: To protect your Switch from unauthorized access, you must
change the two default passwords as soon as possible, even if you do not
intend to actively manage your Switch
Table 9 Default Users
Use the admin default user name (no password) to login and carry out
initial Switch setup.
Changing Default
Passwords
You can change the default passwords using either:
■ The gettingStarted command on the CLI, or
■ The Security > Device > User > Modify operation on the web interface.
For more information about default users and passwords, refer to the
“Switch Management Interface Reference Guide” on the Switch
CD-ROM.
User
Name
Default
Password
Access Level
monitor monitor monitor — the user can view all manageable parameters,
but cannot change any manageable parameters
admin (no
password)
security — the user can access and change all manageable
parameters
DUA1750-0AAA01.book Page 44 Friday, December 5, 2003 10:24 AM
To Next Page
Loading...
