Switch 3300 FX — Front View Detail 13
Switch 3300 FX —
Front View Detail
Figure 1
Switch 3300 FX — front view
100BASE-FX Ports
The Switch has eight 100BASE-FX ports capable of operating in half
duplex or full duplex mode. A 2km (6562ft) fiber run is the maximum
length allowed for a segment.
10BASE-T/
100BASE-TX Ports
The Switch has two auto-negotiating 10BASE-T/100BASE-TX ports
configured as MDIX (cross-over). These ports can be set to 10BASE-T half
duplex, 10BASE-T full duplex, 100BASE-TX half duplex, 100BASE-TX full
duplex, or they can automatically detect the speed and duplex mode of a
link and provide the appropriate connection. The maximum segment
length is 100m (328ft) over Category 5 twisted pair cable.
LEDs
Ta bl e 3
lists the LEDs visible on the front of the Switch, and their states
according to color. For information on using the LEDs for problem solving,
see “Solving Problems Indicated by LEDs”
on page 31.
16982ug1.bk Page 13 Thursday, April 29, 1999 4:51 PM
To Next Page
Loading...
