Need help?Do you have a question about the 3Com 3C16476CS and is the answer not in the manual?
General| Device Type | Switch |
|---|---|
| Form Factor | Rack-mountable |
| Switching Capacity | 12.8 Gbps |
| Manageable | Yes |
| Jumbo Frame Support | Yes |
| Layer | Layer 2 |
| MAC Address Table | 8192 entries |
| Port Type | 10/100Base-TX, SFP (mini-GBIC) |
| Power Supply | Internal |
| Dimensions | 440 x 260 x 44 mm |
| Ports | 24 x 10/100 + 2 x Gigabit SFP |
Details the switch's hardware features like ports, auto-negotiation, and SFP slots.
Instructions on how to safely connect the switch to a power source and verify operation.
Provides steps to log in to the switch's web interface using default credentials.
Covers various administrative tasks like IP setup, backup, and system access.
Explains how to create and manage Virtual LANs to segment network traffic.
Details how to configure port speed, duplex, flow control, and other port-specific options.
Covers configuring RADIUS client and 802.1X settings for network access control.
Instructions on how to restore the switch to its original factory settings.
Guidance on how to regain access if the web interface password is lost.
Directs users to the safety manual for critical safety instructions.
To Next Page