3Com 3C16476CS - QoS VoIP Traffic Settings

50 CHAPTER 4: CONFIGURING THE SWITCH
Figure 48 Port Mirroring Screen
To set up port mirroring:
1 Connect a network analyzer to a port.
2 Access the Web interface. Click Port, then Port
Mirroring on the menu. The Port Monitoring Setup
Screen appears.
3 Select the port number under Monitor Port to which
you want to monitor. Traffic to and from this port will
be forwarded to the analyser port.
4 Select the port number under Analyser Port to which
you connected the network analyzer. Traffic to and
from the selected mirrored ports will be forwarded to
this port.
5 Under Mirror Type, select to monitor incoming traffic,
outgoing traffic, or both.
6 Click Apply.
QoS VoIP Traffic Settings
Using the Web interface, you can configure the Voice
over Internet Protocol (VoIP) settings.
The QoS VoIP Traffic Setting menu includes six tabs:
■ Summary
■ Setup
■ Port Setup
■ Port Detail
■ OUI Summary
■ OUI Modify
Summary
Use the Summary tab to display the global settings
for Voice VLAN.
Figure 49 QoS VoIP Summary Screen