QoS VoIP Traffic Settings 51
Setup
Use the Setup tab to configure the global settings for
Voice VLAN. The following options are available:
■ Voice VLAN Status – Enable or disable Voice VLAN
for the switch.
■ Voice VLAN ID – Input the Voice VLAN ID for the
switch.
■ Voice VLAN Aging Time – Input the aging time.
You must first create a VLAN from the VLAN Setup
page before you can assign and configure a Voice
VLAN.
Figure 50 QoS VoIP Setup Screen
Port Setup
Use the Port Setup tab to configure the port or trunk
setting for Voice VLAN. The following options are
available:
■ Voice VLAN Port Mode – Select between None,
Manual, or Auto.
■ Voice VLAN Port Security – Enable or disable the
security.
To configure the Voice VLAN settings for the ports:
1 Select Voice VLAN Mode and Security settings.
2 Select the ports you would like to apply these settings
to.
3 Click Apply.
Figure 51 QoS Port Setup Screen
Port Detail
Use the Port Detail tab to display the Voice VLAN
information for selected ports.
To Next Page
Loading...
