3Com 4500 - Page 11

11
Tabl e 5 Local-user View
[4500]local-user admin
ssh user (username)
authentication-type
(authenticaltion type)
Define an authentication type for a designated user; either
password, RSA, or public key.
stp
Enable Spanning Tree Protocol Device -> Spanning Tree
stp bpdu-protection
Enable BPDU protection Device -> Spanning Tree
stp mcheck
Force the port to work in RSTP mode
stp mode
Configure the RSTP running mode Device -> Spanning Tree
stp pathcost-standard
Standard to be used for calculating the default Path Cost
stp priority
Configure the bridge priority of the Switch Device -> Spanning Tree
stp root primary
Configure the current switch as the primary root of a
spanning tree
Device -> Spanning Tree
stp root secondary
Configure the current switch as a secondary root of a
specified spanning tree
Device -> Spanning Tree
stp timeout-factor
Configure multiple of hello time
stp timer forward-delay
Configure the time of forward delay Device -> Spanning Tree
stp timer hello
Configure hello time for Switch Device -> Spanning Tree
stp timer max-age
Configure the max age of the Switch for judging stp packets Device -> Spanning Tree
super password level
Configure a password for changing the user from a lower
user level to a higher user level
sysname
Specify the name of the Switch Administration -> SNMP ->
Setup
system-guard
Configure the System-guard feature
tcp timer fin-timeout
Configure the TCP finwait timer
tcp timer syn-timeout
Configure the TCP synwait timer
tcp window
Configure size of transmission and receiving buffers of
connection-oriented socket
tftp-server
Configure the TFTP server
udp-helper enable
Enable UDP Helper function
udp-helper port
Configure the UDP port with relay function
user-interface
Configure the user terminal interface and enter the view (See
Tab le 6, “
User-interface view,” on page 12)
vlan
Configure VLAN and enter VLAN view (See Table 13, “VLAN
View,” on page 14)
Device -> VLAN
voice vlan
Globally enable the Voice VLAN features of one VLAN Device -> Voice VLAN
voice vlan aging
Configure the aging time of Voice VLAN Device -> Voice VLAN
voice vlan mac_address
Set the MAC address that the Voice VLAN can control Device -> Voice VLAN
voice vlan mode auto
Set the Voice VLAN in auto mode Device -> Voice VLAN
voice vlan security enable
Enable the Voice VLAN security mode Device -> Voice VLAN
web set-package
Change the default web source file name
xrn-fabric authentication-
mode
Configure authentication mode of the fabric Device->XRN Fabric
Command Description Web Command
attribute
Configure some attributes for specified local user Administration -> System
Access
level
Configure user priority level Administration -> System
Access
password password-control
aging
Specify password aging Administration -> System
Access
password-control length
Specify password length
Command Description Web Command