3Com 4500 - Page 12

12
Tabl e 6 User-interface view
[4500]user-interface 1
Tabl e 7 VTY User-interface View
[4500]user-interface 1 integer (0-12)
[4500]user-interface 1 aux
[4500]user-interface 1 vty
Tabl e 8 Public Key Edit View
[4500]rsa peer-public-key switchxxx
(where xxx is the Switch number)
Tabl e 9 Public Key View
service-type
Configure a service type for a particular user
state
Configure the state of the current user
Command Description Web Command
acl
Reference ACL and implement the ACL control to the TELNET
users
Security -> Authorized IP
authentication-mode
Configure local password authentication method
auto-execute command
Configure to automatically run a specified command after a
user logs on
databits
Configure the data bits for AUX (Console) port
flow-control
Configure the flow control mode on AUX (Console) port
history-command max-size
Configure the size of the history command buffer
idle-timeout
Configure the timeout function
parity
Configure the parity mode on AUX (Console) port
protocol
Set user interface protocol
screen-length
Configure how many lines can be displayed on a screen of
the terminal
set authentication password
Configure the password for local authentication Administration -> System
Access
shell
Enable terminal service of a user interface
speed
Specify the transmission rate on the AUX (Console) port in
bit/s
stopbits
Configure the stop bits on the AUX (Console) port
user privilege level
Configure which level of command a user can use after logon
from a specific user interface
Command Description Web Command
protocol inbound
Configure the protocols supported by a designated user
interface
Command Description Web Command
public-key-code begin
Enter public key edit view (See Tabl e 8, “Public Key Edit
View,” on page 12)
public-key-code end
Save the configured public key and return to the public key
view
Command Description Web Command
peer-public-key end
Finish editing peer public key and quit from public key view
to system view
Command Description Web Command