Do you have a question about the 3Com 4800G Series and is the answer not in the manual?
Explains features for upgrading network connections and protecting investment.
Details layered security features, including encryption and access control.
Covers link reliability technologies and hardware resiliency.
Focuses on PoE support and voice VLAN technology for optimized traffic.
Describes L2-L4 packet filtering, flow classification, and queue scheduling.
Discusses SNMP, CLI, web management, and encryption for secure control.
Explains RPS connectivity and benefits for power redundancy.
Covers hardware, software, and online support details.
Outlines global services, training, project management, and maintenance.
Details port types, expansion slots, and interface configurations.
Covers switching capacity, forwarding rates, and latency.
Lists L2 features like MAC tables, VLANs, link aggregation, and Spanning Tree.
Outlines L3 routing protocols, IP interfaces, and VRF support.
Describes QoS, VLANs, voice traffic prioritization, and traffic shaping.
Details IEEE 802.1X, RADIUS, AAA, MAC-based authentication, and ACLs.
Explains XRN technology for stacking multiple units with single IP management.
Covers configuration methods, remote management, logging, and management applications.
Provides physical dimensions (height, width, depth) of the switches.
Details AC and DC voltage ranges for power supplies.
Specifies operating temperature and humidity ranges.
Lists MTBF (Mean Time Between Failures) for different models.
Lists compliance with various emissions and agency standards.
Lists safety certifications like UL, IEC, and CAN/CSA.
Lists IEEE and RFC standards supported by the switches.
Lists switch models and their corresponding 3Com SKUs.
Details available expansion modules and SFP/XFP transceivers.
Lists available CX4 connection cables.
Provides links for network services, installation, and training.