3Com 4200G 24-Port User Manual

3Com Switch 4200G Family
Configuration Guide
Switch 4200G 12-Port
Switch 4200G 24-Port
Switch 4200G 48-Port
Switch 4200G PWR 24-Port
Product Version: V3.02.00
Manual Version:
6PW100-20081201
www.3com.com
3Com Corporation
350 Campus Drive, Marlborough,
MA, USA 01752 3064

3Com 4200G 24-Port Specifications

General

VLAN Support	Yes
VLANs	256
Jumbo Frame Support	Yes
Operating Humidity	10% to 90% non-condensing
Layer	2
Management	Web, CLI, SNMP
MAC addresses	8000
Dimensions	440 x 260 x 43.6 mm
Weight	3.5 kg
Power Supply	100-240V AC, 50/60 Hz
Operating Temperature	0°C to 50°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, 802.3u, 802.3ab, 802.3x
Ports	24 x 10/100/1000BASE-T, 4 x SFP

Summary

Logging In to an Ethernet Switch

Introduction to the User Interface

Describes the different user interfaces (AUX and VTY) available for accessing the switch.

Common User Interface Configuration

Details the steps for configuring common user interface settings.

Logging In Through the Console Port

Console Port Login Configuration

Covers common configurations for console port login, including baud rate and data bits.

Console Port Login Configurations for Different Authentication Modes

Explains configurations for console port login with None, Password, and Scheme authentication modes.

CLI Configuration

Introduction to the CLI

Provides an overview of the Command Line Interface (CLI) and its features.

Command Hierarchy

Explains the structure of commands, including command levels and user privilege levels.

Logging In Through the Web-based Network Management Interface

Establishing an HTTP Connection

Details the steps to establish an HTTP connection between a PC and the switch.

Configuring the Login Banner

Explains how to configure a login banner displayed before user authentication.