3Com 4200G 24-Port - CLI Features; Online Help

5-10
View Available operation Prompt example Enter method Quit method
Remote-ping
test group
view
Configure
remote-ping test
group parameters
[Sysname-remot
e-ping-a123-a12
3]
Execute the
remote-ping
command in
system view.
HWTACACS
view
Configure
HWTACACS
parameters
[Sysname-hwtac
acs-a123]
Execute the
hwtacacs
scheme command
in system view.
PoE profile
view
Configure PoE
profile parameters
[Sysname-poe-pr
ofile-a123]
Execute the
poe-profile
command in
system view.
Smart link
group view
Configure smart link
group parameters
[Sysname-smlk-g
roup1]
Execute the
smart-link group
command in
system view.
Monitor link
group view
Configure monitor
link group
parameters
[Sysname-mtlk-gr
oup1]
Execute the
monitor-link
group command
in system view.
The shortcut key <Ctrl+Z> is equivalent to the return command.
CLI Features
Online Help
When configuring the switch, you can use the online help to get related help information. The CLI
provides two types of online help: complete and partial.
Complete online help
1) Enter a question mark (?) in any view on your terminal to display all the commands available in the
view and their brief descriptions. The following takes user view as an example.
<Sysname> ?
User view commands:
boot Set boot option
cd Change current directory
clock Specify the system clock
cluster Run cluster command
copy Copy from one file to another
debugging Enable system debugging functions
delete Delete a file
dir List files on a file system
display Display current system information