1-5
The configuration file must use .cfg as its extension name and the startup configuration file must be
saved at the root directory of the switch.
Displaying Switch Configuration
To do… Use the command… Remarks
Display the initial configuration
file saved in the Flash of a switch
display saved-configuration [ unit unit-id ]
[ by-linenum ]
Display the configuration file used
for this and next startup
display startup [ unit unit-id ]
Display the current VLAN
configuration of the switch
display current-configuration vlan [ vlan-id ]
[ by-linenum ]
Display the validated
configuration in current view
display this [ by-linenum ]
Display current configuration
display current-configuration
[ configuration [ configuration-type ] |
interface [ interface-type ]
[ interface-number ] ] [ by-linenum ] [ | { begin
| exclude | include } regular-expression ]
Available in
any view.
To Next Page
Loading...
