3Com 4200G 24-Port - Configuring Dynamic Domain Name Resolution; Displaying and Maintaining DNS

1-3
To do… Use the command… Remarks
Enter system view
system-view
—
Configure a mapping
between a host name and
an IP address
ip host hostname
ip-address
Required
No IP address is assigned
to a host name by default.
The IP address you assign to a host name last time will overwrite the previous one if there
is any.
You may create up to 50 static mappings between domain names and IP addresses.
Configuring Dynamic Domain Name Resolution
Follow these steps to configure dynamic domain name resolution:
To do… Use the command… Remarks
Enter the system view
system-view
—
Enable dynamic domain
name resolution
dns resolve
Required
Disabled by default
Configure an IP address for
the DNS server
dns server ip-address
Required
No IP address is configured
for the DNS server by
default.
Configure DNS suffixes
dns domain domain-name
Optional
No DNS suffix is configured
by default
You may configure up to six DNS servers and ten DNS suffixes.
Displaying and Maintaining DNS
To do… Use the command… Remarks
Display static DNS database
display ip host
Display the DNS server
information
display dns server [ dynamic ]
Display the DNS suffixes display dns domain [ dynamic ]
Display the information in the
dynamic domain name cache
display dns dynamic-host
Available in
any view