Need help?Do you have a question about the 3Com 4210 and is the answer not in the manual?
General| Model | 3Com 4210 |
|---|---|
| Category | Switch |
| Layer | Layer 2 |
| VLAN Support | Yes |
| Switching Capacity | 8.8 Gbps |
| Forwarding Rate | 6.6 Mpps |
| Jumbo Frame Support | Yes |
| Power Supply | Internal |
| MAC Address Table Size | 8000 entries |
| Features | Port Mirroring |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab |
| Management | Web-based, CLI |
Details about the 3Com Switch 4210 Family Power over Ethernet (PoE) models.
Details about the 3Com Switch 4210 Family models without Power over Ethernet (Non-PWR).
Detailed technical specifications for Switch 4210 and PWR models, including dimensions, weight, and power.
Crucial safety warnings and instructions before installing or removing switch components.
Instructions for rack-mounting 26-Port and 52-Port models in a standard 19-inch rack.
Guidelines for placing the switch on a desktop for installation.
Information and warnings regarding the connection of a -48V DC Redundant Power Supply (RPS).
Procedure for connecting a console cable for switch management.
Steps to manually configure the switch's IP address, subnet mask, and default gateway.
Troubleshooting guide for problems indicated by the switch's LEDs.
Guidance for troubleshooting hardware failures, such as fan issues.
Steps to resolve communication issues, including IP addressing and SFP transceiver errors.
Troubleshooting steps for issues related to forming a switch fabric.
Critical safety warnings and instructions for installing and using the Redundant Power Supply (RPS).
To Next Page
