3Com 4200G 24-Port - Page 46

5-9
View Available operation Prompt example Enter method Quit method
User interface
view
Configure user
interface parameters
[Sysname-ui-aux
0]
Execute the
user-interface
command in
system view.
FTP client
view
Configure FTP client
parameters
[ftp]
Execute the ftp
command in user
view.
SFTP client
view
Configure SFTP
client parameters
sftp-client>
Execute the sftp
command in
system view.
MST region
view
Configure MST
region parameters
[Sysname-mst-re
gion]
Execute the stp
region-configurat
ion command in
system view.
Cluster view
Configure cluster
parameters
[Sysname-cluster
]
Execute the
cluster command
in system view.
Configure the RSA
public key for SSH
users
[Sysname-rsa-pu
blic-key]
Execute the rsa
peer-public-key
command in
system view.
Public key
view
Configure the RSA or
DSA public key for
SSH users
[Sysname-peer-p
ublic-key]
Execute the
public-key peer
command in
system view.
Execute the
peer-public-key
end command
to return to
system view.
Edit the RSA public
key for SSH users
[Sysname-rsa-ke
y-code]
Public key
editing view
Edit the RSA or DSA
public key for SSH
users
[Sysname-peer-k
ey-code]
Execute the
public-key-code
begin command in
public key view.
Execute the
public-key-cod
e end command
to return to
public key view.
Basic ACL
view
Define rules for a
basic ACL (with ID
ranging from 2000 to
2999)
[Sysname-acl-
basic-2000]
Execute the acl
number command
in system view.
Advanced
ACL view
Define rules for an
advanced ACL (with
ID ranging from 3000
to 3999)
[Sysname-acl-ad
v-3000]
Execute the acl
number command
in system view.
Layer 2 ACL
view
Define rules for an
layer 2 ACL (with ID
ranging from 4000 to
4999)
[Sysname-acl-eth
ernetframe-4000]
Execute the acl
number command
in system view.
RADIUS
scheme view
Configure RADIUS
scheme parameters
[Sysname-radius-
1]
Execute the
radius scheme
command in
system view.
ISP domain
view
Configure ISP
domain parameters
[Sysname-isp-aa
a123.net]
Execute the
domain command
in system view.
Execute the quit
command to
return to system
view.
Execute the
return
command to
return to user
view.