3Com 5500-SI - Page 8

3Com Switch 5500 Family
Quick Reference Guide
debugging multicast status-forwarding
Use the debugging multicast status-forwarding to enable multicast forwarding status debugging
functions.
User view
debugging ntp-service
Use the debugging ntp-service command to debug different NTP services.
User view
debugging pim common
Use the debugging pim common to enable common PIM debugging functions.
User view
debugging pim dm
Use the debugging pim dm to enable PIM-DM debugging functions.
User view
debugging pim sm
Use the debugging pim sm to enable PIM-SM debugging functions.
User view
debugging resilient-arp
Use the debugging resilient-arp command to enable resilient ARP debugging.
User view
debugging ssh server
Use the debugging ssh server command to send the negotiation process and other information prescribed
in SSH 2.0 to the information center as debugging information, and to enable debugging for a single user
interface.
User view
debugging udp-helper
Use the debugging udp-helper command to enable UDP Helper debugging.
User view
debugging vrrp
Use the debugging vrrp command to enable VRRP debugging.
User view
debugging webcache
Use the debugging webcache command to enable the debugging for Webcache redirection.
User view
default cost
Use the default cost command to configure the default routing cost of an external route imported by
OSPF.
OSPF view
default-cost
Use the default-cost command to configure the cost of the route transmitted by OSPF to a Stub or NSSA
area.
OSPF Area view
default cost
Use the default cost command to set the default routing cost of an imported route.
RIP view
default interval
Use the default interval command to configure the default interval for OSPF to import external routes.
OSPF view
default limit
Use the default limit command to configure maximum number of allowed imported routes.
OSPF view
default-route-advertise
Use the default-route-advertise command to import the default route into the OSPF Autonomous
System.
OSPF view
default tag
Use the default tag command to configure the default tag of OSPF when it redistributes an external route.
OSPF view