3Com 5500G User Manual

www.3Com.com
Part Number 10016378 -AA
Published March 2008
3Com
®
Switch 5500G Open Services
Networking
Configuration and Command Reference
Guide

3Com 5500G Specifications

General

Model	3Com 5500G
Category	Switch
Stacking	Yes
Layer	Layer 3
MAC Address Table Size	16K
Jumbo Frame Support	Yes
Ports	24 or 48 10/100/1000 ports
Uplink Ports	4 SFP slots
Management	CLI, SNMP
Routing Protocol	RIP, OSPF
VLANs	4094
Dimensions	440 x 260 x 44 mm

Summary

Configuring the Application Control Forwarding Protocol (ACFP)

Configuring ACFP

Outlines steps to configure ACFP, starting with system view.

ACFP Configuration Example

Introduces an ACFP configuration example and network requirements.

Configuring an Application Control System Exchange Interface

Configuring an ACSEI Server on a Switch

Enabling an ACSEI Server

Closing an ACSEI Client

Restarting an ACSEI Client

ACSEI Client Configuration on Linux System

ACSEI client configs after switching to Linux system.

Installing ACSEI Client

Steps to install ACSEI client using RPM packages.

Configuring the Default Startup Settings for an ACSEI Client

Controlling ACSEI Client

Commands to start, reload, restart, and stop ACSEI client.

OSN|M Configuration Commands

osm connect unit

Command to switch to OSN|M Linux OS from switch CLI.

osm reboot unit

Command to restart OSN|M Linux OS.

ACFP Configuration Commands

acfp enable

Command to enable or disable ACFP.

ACSEI Server Configuration Commands

acsei client close

Command to close an ACSEI client.

acsei client reboot

Command to restart an ACSEI client.

acsei server enable

ACSEI Client Configuration Commands on the OSN|M

service acseid condrestart

Command for conditional ACSEI client restart.

service acseid reload

Command to load ACSEI client configuration.

service acseid restart

Command to restart ACSEI client.

service acseid start

Command to start ACSEI client.

service acseid stop

Command to stop ACSEI client.