3Com 5500G - Display Acfp Rule-Info

36 Chapter 5: ACFP Configuration Commands
Examples # Display information about all the active policies that specify the packet
inbound port as GigabitEthernet 1/0/1.
<SW5500G> display acfp policy-info in-interface GigabitEthernet 1/0/1 active
ACFP policy total number: 1
ClientID: 1 Policy-Index: 1
Rule-Num: 0 ContextID: 2097153
Exist-Time: 200 (s) Life-Time: 1000 (s)
Start-Time: 12:00:00 End-Time: 18:00:00
Admin-Status: enable Effect-Status: inactive
In-Interface: GigabitEthernet1/0/1
Dest-Interface: GigabitEthernet1/1/1
display acfp rule-info
Syntax display acfp rule-info { in-interface [ interface-type interface-number ]
| | policy [ client-id policy-index ] }
View Any view
Table 2 Description of the display acfp policy-info command fields
Field Description
ACFP policy total number Total number of ACFP policies
ClientID Client ID, index of client list
Policy-Index Policy index
Rule-Num Number of rules under the
policy
ContextID Context ID
Exist-Time Indicates, in seconds, how long
the policy has existed
This value is refreshed every 10
seconds.
Life-Time Policy expiration time, in
seconds
Start-Time Policy start time
End-Time Policy end time
Admin-Status Policy administration status
Effect-Status Whether the policy is effective
In-Interface Port through which the packet
is sent to the ACFP server
Dest-Interface Port through which the packet
is sent to the ACFP client