3Com 5500G - service acseid stop

53
# Start the ACSEI client on unit 1 when the ACSEI client is stopped.
<SW5500G> osm connect unit 1
Connected to OSM!
[root@localhost ~]# service acseid start
Starting acseic-daemon: [ OK ]
service acseid status
Syntax service acseid status
View Any Linux system directory
Parameters None
Description Use the service acseid status command to query the running status of
an ACSEI client.
Examples # View the running status of the ACSEI client on unit 1.
<SW5500G> osm connect unit 1
Connected to OSM!
[root@localhost ~]# service acseid status
acseic-daemon (pid 2335) is running...
service acseid stop
Syntax service acseid stop
View Any Linux system directory
Parameters None
Description Use the service acseid stop command to stop an ACSEI client.
By default, the ACSEI client starts automatically when the Linux system
starts.