3Com 5500G - Snmp-Agent Trap Enable

39
snmp-agent trap enable
Syntax snmp-agent trap enable acfp [ client | policy | rule | server ]
undo snmp-agent trap enable acfp [ client | policy | rule | server ]
View System view
Parameters acfp: Enables the switch to send ACFP traps.
■ client: Enables the switch to send ACPF client traps.
■ policy: Enables the switch to send ACFP policy traps.
■ rule: Enables the switch to send ACFP policy rules traps.
■ server: Enables the switch to send ACFP server traps.
Description Use the snmp-agent trap enable acfp command to enable the switch
to send ACFP traps.
Use the undo snmp-agent trap enable acfp command to disable the
switch from sending ACFP traps.
By default, a switch is enabled to send ACFP traps.
Table 4 Description of the display acfp server-info command fields
Field Description
Server-Info ACFP client working mode
supported by the ACFP server:
■ ipserver: host mode
■ redirect: redirect mode
■ mirror: mirror mode
Max Life-Time Maximum expiration time (in
seconds) of the collaboration policy
supported by the server
PersistentRules Whether the server supports
permanent collaboration rules
ContextType switch-context: The packet carrying
the context ID is applicable on a
switch.