3Com 5500G - service acseid reload; service acseid restart

51
[root@localhost ~]# service acseid status
acseic-daemon is stopped
service acseid reload
Syntax service acseid reload
View Any Linux system directory
Parameters None
Description Use the service acseid reload command to load the ACSEI client
configuration file.
Note that you can load the ACSEI client configuration file only when the
ACSEI client is running. Otherwise, you will fail to load the ACSEI client
configuration file.
Examples # Load the ACSEI client configuration file on unit 1.
<SW5500G> osm connect unit 1
Connected to OSM!
[root@localhost ~]# service acseid status
acseic-daemon (pid 2335) is running...
[root@localhost ~]# service acseid reload
Reloading configuration: [ OK ]
service acseid restart
Syntax service acseid restart
View Any Linux system directory
Parameters None
Description Use the service acseid restart command to restart the ACSEI client.