Need help?Do you have a question about the 3Com 5500G-EI and is the answer not in the manual?
Details commands for accessing and managing system access and security.
Configures the authentication method for user login (password, scheme, or none).
Configures the switch to automatically run a specified command upon user login.
Describes commands for configuring and managing Ethernet ports on the switch.
Configures the amount of broadcast traffic accepted on a port to prevent storms.
Configures the duplex mode (auto, full, or half) of an Ethernet port.
Describes commands for configuring and managing VLANs and VLAN interfaces.
Sets or cancels a description for the current VLAN or VLAN interface.
Views information about specific VLANs, types of VLANs, or all VLANs.
Enters a VLAN interface view to configure related parameters.
Describes commands for configuring and managing PoE on the system.
Views the PoE status of a specific port or all ports on the switch.
Enables or disables the PoE feature on a port.
Configures the maximum power that can be supplied by the current port.
Describes commands for configuring and managing IP Addressing on the switch.
Details commands for accessing and managing system access and security.
Configures the authentication method for user login (password, scheme, or none).
Configures the switch to automatically run a specified command upon user login.
Describes commands for configuring and managing Ethernet ports on the switch.
Configures the amount of broadcast traffic accepted on a port to prevent storms.
Configures the duplex mode (auto, full, or half) of an Ethernet port.
Describes commands for configuring and managing VLANs and VLAN interfaces.
Sets or cancels a description for the current VLAN or VLAN interface.
Views information about specific VLANs, types of VLANs, or all VLANs.
Enters a VLAN interface view to configure related parameters.
Describes commands for configuring and managing PoE on the system.
Views the PoE status of a specific port or all ports on the switch.
Enables or disables the PoE feature on a port.
Configures the maximum power that can be supplied by the current port.
Describes commands for configuring and managing IP Addressing on the switch.
General| Switching Capacity | 136 Gbps |
|---|---|
| Manageable | Yes |
| Layer | Layer 3 |
| Power Supply | AC 100-240V, 50/60 Hz |
| Weight | 4.5 kg |
| MAC Address Table | 16K entries |
| Features | QoS, ACLs, STP, RSTP, MSTP |
| VLANs | 4094 |
| Forwarding Rate | 95.2 Mpps |
To Next Page