3Com 5500G-EI - Reset Ip Statistics; Reset Tcp Statistics; Reset Udp Statistics

140 CHAPTER 5: USING NETWORK PROTOCOL COMMANDS
reset ip statistics Syntax
reset ip statistics
View
User View
Parameter
None
Description
Use the reset ip statistics command to clear the IP statistics information.
Related commands: display ip interface, display ip statistics.
Example
To clear the IP statistics information, enter the following:
<SW5500>reset ip statistics
reset tcp statistics Syntax
reset tcp statistics
View
User View
Parameter
None
Description
Use the reset tcp statistics command to clear the TCP statistics information.
Related command: display tcp statistics.
Example
To clear the TCP statistics information, enter the following:
<SW5500>reset tcp statistics
reset udp statistics Syntax
reset udp statistics
View
User View
Parameter
None
Description
Use the reset udp statistics command to clear the UDP statistics information.