3Com 5500G-EI - Display Users; Free User-Interface

Logging in Commands 29
display users Syntax
display users [ all ]
View
All views
Parameter
all: Enter to display information on all user interfaces.
Description
Use the display users command to view information on the current user
interface. Use the
display users all command to view the information on all
user interfaces.
Example
To display information on the current user interface, enter the following
[SW5500]display users
The information displays in the following format:
UI Delay Type IPaddress Username Userlevel
F 0 AUX 0 00:00:00 3
The categories of information displayed are as follows:
free user-interface Syntax
free user-interface { type | number }
View
User view
1 total UIs in use The total number of user interfaces in use
UI’s name User interface name
Table 4 Output Description of the display user-interface summary Command
Field Description
Table 5 Output description of the display users command
Field Description
F Indicates that the user interface is in use and is working in asynchronous mode
UI Number of the first list is the absolute number of user interface.
Number of the second list is the relative number of user interface
Delay Indicates the interval from the latest input until now, in seconds.
Type Indicates the user interface type.
IPaddress Displays initial connection location, namely the host IP address of the incoming
connection.
Username Display the login name of the user who is using this interface
Userlevel Display the level of the user using this user interface