3Com 5500G-EI - Clock Summer-Time

Basic System Configuration and Management Commands 443
<SW5500>clock datetime 09:30:00 2004/01/01
clock summer-time Syntax
clock summer-time zone_name one-off start_time start_date end_time
end_date offset_time
clock summer-time zone_name repeating { start-time start-date
end-time end-date | start-time start-year start-month start-week
start-day end-time end-year end-month end-week end-day } offset-time
undo clock summer-time
View
User view
Parameters
zone_name : Enter the name of the summer time zone, up to 32 characters in
length.
one-off: Specifies that the summer time is set for the selected year.
repeating: Specifies that the summer time is set for every year, starting from the
selected year.
start_time : Enter the start time of summer time, in the format HH:MM:SS.
start_date : Enter the start date of summer time, in the format YYYY/MM/DD.
end_time : Enter the end time of summer time, in the format HH:MM:SS.
end_date : Enter the end date of summer time, in the format YYYY/MM/DD.
start-year : start year, ranging from 2000 to 2099.
start-month : start month, the value can be the following :January, February,
March, April, May, June, July, August, September, October, November, December.
start-week : start week, the value can be the following : first, second, third,
fourth, fifth, last.
start-day : start day , the value can be the following : Sunday, Monday, Tuesday,
Wednesday, Thursday, Friday, Saturday.
end-yea r: end year, ranging from 2000 to 2099. The value must be same as start
year.
end-month : end month, the value can be the following :January, February, March,
April, May, June, July, August, September, October, November, December.
end-week : end week, the value can be the following : first, second, third, fourth,
fifth, last.
end-day : end day , the value can be the following : Sunday, Monday, Tuesday,
Wednesday, Thursday, Friday, Saturday.