AAA Configuration Commands 369
■ If the threshold is reached, the Switch sends messages containing the user's
remaining online time to the client at the interval you configured.
■ The client keeps the user informed of the remaining online time through a
message alert dialog box.
Example
To configure to start the sending of alert messages when the user's remaining
online time is 30 minutes and send the messages at an interval of five minutes,
enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]domain system
New Domain added
[SW5500-isp-system]messenger time enable 30 5
password Syntax
password { simple | cipher }
password
undo password
View
Local User View
Parameter
simple: Specifies to display passwords in simple text.
cipher: Specifies to display passwords in cipher text.
password
: Defines a password, which is a character string of up to 16 characters
if it is in simple text and of up to 24 characters if it is in cipher text.
Description
Use the password command to configure a password display mode for local users.
Use the
undo password command to cancel the specified password display mode.
Related command: display local-user.
Example
To set the user 3Com1 to display the password in simple text, given the password
is 20030422, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]local-user 3Com1
[SW5500-luser-3Com1]password simple 20030422
radius-scheme Syntax
radius-scheme
radius-scheme-name
View
ISP Domain View
To Next Page
Loading...
