3Com 5500G-EI - Public-Key-Code End; Rsa Local-Key-Pair Create

518 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]rsa peer-public-key SW5500003
[SW5500-rsa-public-key]public-key-code begin
[SW5500-rsa-key-code]308186028180739A291ABDA704F5D93DC8FDF84C427463
[SW5500-rsa-key-code]1991C164B0DF178C55FA833591C7D47D5381D09CE82913
[SW5500-rsa-key-code]D7EDF9C08511D83CA4ED2B30B809808EB0D1F52D045DE4
[SW5500-rsa-key-code]0861B74A0E135523CCD74CAC61F8E58C452B2F3F2DA0DC
[SW5500-rsa-key-code]C48E3306367FE187BDD944018B3B69F3CBB0A573202C16
[SW5500-rsa-key-code]BB2FC1ACF3EC8F828D55A36F1CDDC4BB45504F020125
[SW5500-rsa-key-code]public-key-code end
public-key-code end Syntax
public-key-code end
View
Public key edit view
Parameter
None
Description
Use the public-key-code end command to save the configured public key and
return to the public key view from the public key edit view.
This command terminates the edit process of public key and checks its validity
before saving. If the public key contains invalid characters or violates coding rules,
corresponding information will be prompted and the current configuration fails. If
you have configured valid public key, the system will store it into the public key
table.
Related command: rsa peer-public-key, public-key-code begin.
Example
To exit the public key edit view and save the configuration, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500] rsa peer-public-key 3COM003
[SW5500-rsa-public-key] public-key-code begin
[SW5500-rsa-key-code]public-key-code end
[SW5500-rsa-public-key]
rsa local-key-pair create Syntax
rsa local-key-pair create
View
System view
Parameter
None