3Com 5500G-EI - Display Snmp-Agent Usm-User; Display Snmp-Proxy Unit

SNMP Configuration Commands 479
display snmp-agent
usm-user
Syntax
display snmp-agent usm-user [ engineid engineid | group groupname |
username username ]
View
All views
Parameter
engineid: display user information with specified engine ID.
username: display user information with specified user name.
groupname: display user information of specified group.
Description
Use the display snmp-agent usm-user command to view information of all the
SNMP usernames in the group username list.
Example
Display the information of all the current users.
<SW5500>display snmp-agent usm-user
User name: authuser
Engine ID: 00000009020000000C025808
UserStatus: active
The following table describes the output fields.
display snmp-proxy unit Syntax
display snmp-proxy unit unit-id
View
Any view
Parameter
unit-id :Unit ID of the switch.
Description
Using display snmp-proxy unit command, you can view statistics information
of SNMP proxy.
Example
View statistics information of SNMP proxy on unit 1.
<SW5500> display snmp-proxy unit 1
Number of GetReq msgs received :0
Table 61 Output description of the display snmp-agent usm-user command
Field Description
User name Name of SNMP user
Engine ID Character string identifying SNMP device
UserStatus The status of the user, may be active or inactive